Project Info

Manhole Rehabilitation

Client:
Finch Paving (1993) Inc
2017
Areas Repaired Exterior concrete repair and waterproofing of the exposed manhole shaft
Repair Types Patch work, concrete restoration, crack injection and outer shell waterproofing applications
Issues Concrete delamination and leaks

Project Description

Another city project was the reparation of manholes, which needed concrete repair and waterproofing of the exposed shaft. Patch work, concrete restoration, crack injection and outer shell waterproofing applications were required to complete the job.

Patching
Under traditional repair methods, patching requires a minimum of two-inch demolition in the affected area. The use of our unique products, Polyforce Plus, and polymer cement, permits thin-patch applications, making the job much more cost-efficient and faster.

Our patching process is as follows:

  1. Delaminated and unsound concrete is removed.
  2. Polyforce Plus Adhesive is applied as an adhesive layer. Its impressive 1.85 MPa adhesive strength ensures monolithic adhesion.
  3. Within 40 minutes, the actual patch is applied. On very thin patches (less than a ¼ of an inch), Polyforce Polymer Cement is used; otherwise, regular cement.
The newly-patched area will not delaminate thanks to the our product’s unprecedented adhesive power.

Crack Repair
Traditionally speaking, two slabs of concrete cannot be glued together when there is a crack. This, however, is not the case through the use of our specialized materials which make monolithic 1.85 MPa adhesion possible. Not only can we repair concrete but also restore it to its original condition, even when wet. It works both on single cracks and concrete surfaces with multiple issues - no need for complete resurfacing. Such rehabilitation is even done on concrete surfaces that are combined with metal structures.

The following process was applied:
  1. Cracks were routed with a saw to create a V-groove to prep the area for repair.
  2. The crack was filled with Polyforce Plus Adhesive which ensures immediate and durable monolithic adhesion.
  3. The crack was patched with the polymer cement.
  4. Waterproofing Polyforce Plus  Primer was applied over the area.

Technical Details

Facts

In accordance with third-party testing, the repaired surfaces are rated to the following:

Polyforce Plus

  • 25 years of useful life
  • 0% water permeation
  • Polyforce Plus is rated to expand and contract with concrete
  • The entire surface and volume of the slab is "monolithic"
  • Polyforce Plus compressive strength of 85 MPa
  • Basalt mix compressive strength of 150 MPa
  • Adhesive strength of 1.85 MPa (original concrete has only 1.2 MPa of a tensile strength, so the bond is stronger than the concrete itself)
  • Repair is 60% cost of a traditional repair

 

PolyFlex

  • Application of PolyFlex from the negative side reduces cost by 90% when compared to the traditional method of repair
  • 10 years of useful life
  • 0% water permeation
  • PolyFlex is able to expand and compress 200%
  • 200% expansion and compression does not affect adhesion or tensile strength of PolyFlex

Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International Inc.

Our Contacts

22 Jutland Rd, Unit C
Toronto, Ontario, M8Z 2G9
Canada

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416