Project Info

80 Antibes Drive - Garage

Client:
Cpo/Canadian Properties Operator Management Inc.
Areas Repaired Ledge Beams, Expansion Joints, Wall / Ceiling Patching and Waterproofing, Crack Injection
Repair Types Polyforce Plus Patching with Basalt and Concrete, Fiberglass Coating, Polyforce Plus Crack Injection, PolyFlex Ledge Beam and Expansion Joint Injection
Issues Active leaks, Membrane Failure, Concrete Delamination, Concrete Cracks

Project Description

The area around the pipes in the ceiling were leaking and the concrete was curroding.

The area was cleaned, grinded and damaged concrete removed.  

Repairs were done on the ceiling  with use of Polyforce Plus and Basalt mix.

This mix is made to be a paste like consistency, which allows the patching work to be done without forming around the pipes.

Expansion Joints

The repair of Expansion Joints was done from a negative side by injection of PolyFlex.
The old Expansion Joints were removed and the Joint surfaces were cleaned.
A flexible Polyforce strip of fiberglass with injection nozzles was installed on the ceiling. PolyFlex was injected into the joint.
PolyFlex is completely liquid when applied, which makes it ideal for this type of application. PolyFlex's increased adhesion to concrete with ability to stretch to 200% of its applied volume provides a sustainable and long lasting results. PolyFlex is ideal for Expansion Joint repair and waterproofing.

Technical Details

Facts:

According to third party testing, the repaired surfaces are rated to:

PolyFlex

  • Application of PolyFlex from the negative side reduces cost by 90% when compared to the traditional method of repair
  • 10 years of useful life
  • 0% water permeation
  • PolyFlex is able to expand and compress 200%
  • 200% expansion and compression does not affect adhesion or tensile strength of PolyFlex
 

Facts:

According to third party testing, the repaired surfaces are rated to:

Polyforce Plus

  • 25 years of useful life
  • 0% water permeation
  • Polyforce Plus is rated to expand and contract with concrete
  • The entire surface and volume of the slab is "monolithic"
  • Compressive strength of 85 MPa
  • Polyforce Plus mixed with Basalt reaches a compressive strength of 150 MPa
  • Adhesive strength of 1.85 MPa (original concrete has only 1.2 MPa of a tensile strength, so the bond is stronger than the concrete itself)
  • Repair is 60% cost of a traditional repair
Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International Inc.

Our Contacts

22 Jutland Rd, Unit C
Toronto, Ontario, M8Z 2G9
Canada

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416