Videos

Polyforce Triplex - Mississauga Salt Storage

1.8 MPa Adhesive, Thin Patch, Fiberglass, 150 MPa Basalt

Application Type: Roll-on or brush application

Monolithic 1.8 MPa Polyforce Plus Adhesive forms monolithic slabs, truly restoring concrete slab.

Polyforce Plus Rust Proofs metal surfaces.

Fiberglass and 150 MPa Basalt form armored protective surface.

Ministry of Transportation standard testing rates material for 25 years with 0% degradation.

Polyforce Plus Red Mixing

Mixing 0.5 L Package, Application of adhesive layer

Application Type: Roll-on or brush application

Comprehensive strength of 85 MPa, Adhesive strength of 1.85 MPa.

Certified by the Ministry of Transportation, Rated for 25 years of useful life.

  • Mix Polyforce Plus Red
  • Apply on to the repaired area with a brush
  • Pour new cement right over (best to do it inside of 30 min. from the applications)
  • 5 hours = 1.8 MPa monolithic adhesion
  • 0.5 L should cover around 10 Sq Ft of concrete

Polyforce Plus Red Monolithic Patch

Thin layer patch application, no cracks or delamination

Application Type: Roll-on or brush application

Comprehensive strength of 85 MPa, Adhesive strength of 1.85 MPa.

Certified by the Ministry of Transportation, Rated for 25 years of useful life.

  • Mix Polyforce Plus
  • Treat the repaired area with Polyforce Plus to form a bonding layer
  • Apply Cement patch right over (best to do it inside of 30 min. from the applications)
  • 5 hours = 1.8 MPa monolithic adhesion
  • 0.5 L should cover around 10 Sq Ft of concrete

Gardiner Bridge Pier

Polyforce Plus & Basalt, Polyforce Black Cement Patch

Application Type: Roll-on or brush application

Comprehensive strength of 85 MPa, Adhesive strength of 1.85 MPa.

Certified by the Ministry of Transportation, Rated for 25 years of useful life.

  • Mix Polyforce Plus
  • Treat the repaired area with Polyforce Plus to form a bonding layer
  • Apply Cement patch right over (best to do it inside of 30 min. from the applications)
  • 5 hours = 1.8 MPa monolithic adhesion
  • 0.5 L should cover around 10 Sq Ft of concrete

Negative Side Applications

Polyforce Plus & Basalt, Polyforce Black Cement Patch

Application Type: Roll-on or brush application

Comprehensive strength of 85 MPa, Adhesive strength of 1.85 MPa.

Certified by the Ministry of Transportation, Rated for 25 years of useful life.

  • Mix Polyforce Plus
  • Treat the repaired area with Polyforce Plus to form a bonding layer
  • Apply Cement patch right over (best to do it inside of 30 min. from the applications)
  • 5 hours = 1.8 MPa monolithic adhesion
  • 0.5 L should cover around 10 Sq Ft of concrete
  • Mix Black Cement with water, apply patch
  • Accelerate the cure with open flame torch

About Us

Polyforce International Inc.

Our Contacts

22 Jutland Rd, Unit C
Toronto, Ontario, M8Z 2G9
Canada

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416