Project Info

175 Cedar Ave, Richmond Hill

Vero Property Management
Areas Repaired Ceiling corner
Repair Types Polyflex
Issues Leak

Project Description

Ceiling Patching

Under traditional repair methods, patching requires a minimum of two-inch demolition in the affected area. Besides, patching a ceiling poses an added challenge - lack of adhesion, and non-specialized material falling out without use of forming. The use of our unique products, Polyforce Plus Adhesive, and Polyforce Polymer Cement, permits thin-patch applications, even on walls and ceilings, without use of any forming or concrete injection, making the job much more cost-efficient and faster. The combination of Polyforce Plus Adhesive and Polymer Cement creates a monolithic patch which is able to restore structural integrity of repaired slab. 

Our patching process is as follows:

  1. Delaminated and unsound concrete is removed.
  2. Polyforce Plus Adhesive is applied as an adhesive layer. Its impressive 1.85 MPa adhesive strength ensures monolithic adhesion
  3. Within 40 minutes, the actual patch is applied. On very thin patches (less than a ¼ of an inch), Polyforce Polymer Cement is used; otherwise, regular cement.

Expansion Joints

Normally, when there is a failure of waterproofing membrane over the surface of expansion joints, the entire membrane must be removed and reinstalled. The excavation required by the traditional repair method is quite costly, but can be avoided with the use of PolyFlex expansion joint application. 

What we do is drastically different: we drill injection ports and inject our specialized liquid material which turns into soft rubber. It has tremendous adhesion power capable of binding cracked concrete, and displacing any accumulated water, not allowing it to re-enter. The concrete slabs can still expand and contract due to the nature of the materials injected. At the same time, such injection seals any crack in the membrane, preventing any future leaks from recurring.

This type of application method has been proven to create permanent waterproofing with a high degree of success and long-lasting results. Application from within the structure will avoid unnecessary expenses of top-side repair. 

Technical Details

Polyforce Plus Adhesive
The use of specialized product, Polyforce Plus Adhesive, permits restoration of the carrying capacity of the slab through monolithic concrete patching and crack repair, providing an alternative to complete slab recasting.

Polyforce Plus coating is tested to provide 25 years of freeze and thaw waterproofing with no degradation and water permeation. This material is rated to expand and contract with concrete, ensuring long-lasting adhesion of concrete patches due to its impressive 1.85 MPa adhesive strength (compared to 1.2 MPa tensile strength of the original concrete). This makes the patch and the old concrete slab work as one. 

Polyforce Plus, when mixed with basalt, achieves compressive strength of 150 MPa, making it ideal for surfaces that suffer high mechanical intrusion or increased and prolonged exposure to light acids..
Versatility of application and high strength of installation produce significant cost savings, when compared to traditional concrete repairs. 

Polyforce Polymer Cement
Polymer Cement was designed for fast and thin patch applications. When combining patch application of Polymer Cement with high-strength industrial concrete adhesives, many applications which would otherwise be too expensive to execute become cost-effective and feasible. Most typical applications include valley resurfacing, slope reversals, crack repair patches, and stair and balcony repairs. 

Polymer Cement is designed to perform in thicknesses ranging from 0.01 inches to 0.25 and beyond. The material performs at 99% dry finish volume. 

PolyFlex is a liquid injected flexible material used to repair expansion joints. It is designed to allow expansion and contraction of expansion joints up to 180%. Injecting PolyFlex completely removes any collected water and repairs membrane cracks. This type of repair prevents hydraulic pockets from reoccurring and contributes to long-lasting waterproofing results.  Since it is soft and flexible, it binds itself perfectly to any concrete surface and does not delaminate.

Application of PolyFlex from the negative side (from inside of a parking garage or an elevator shaft) reduces costs by 60%, when compared to the traditional method of repair.

Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International, Inc.

Our Contacts

25 Coronet Rd, Unit 8
Etobicoke, Ontario, M8Z 2L8

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416