Project Info

25 Carlton - Planter

Client:
First Service Property Management
2016
Areas Repaired Concrete planters
Repair Types Triplex, Basalt Coating
Issues Crack, Leak, Concrete delamination

Project Description

Fixing a flat roof requires crack repair and patching ahead of roof membrane application. Each flat roof membrane installation and design is specified by the engineering consultant. Throughout our portfolio of flat roof membrane installations, we have had experience with most of the typical membrane types.

Crack repair

Traditionally speaking, two slabs of concrete cannot be glued together when there is a crack. This, however, is not the case through the use of our specialized materials which make monolithic 1.85 MPa adhesion possible. Not only can we repair concrete but also restore it to its original condition, even when wet. It works both on single cracks and concrete surfaces with multiple issues - no need for complete resurfacing. Such rehabilitation is even done on concrete surfaces that are combined with metal structures.

The following process is applied:

  • Cracks are routed with a saw to create a V-groove to prep the area for repair.
  • The crack is filled with Polyforce Plus Adhesive which ensures immediate and durable monolithic adhesion.
  • The crack is patched with the polymer cement.
  • Waterproofing Polyforce Plus Primer is applied over the area.

Patching

Under traditional repair methods, patching requires a minimum of two-inch demolition in the affected area. The use of our unique products, Polyforce Plus, and polymer cement, permits thin-patch applications, making the job much more cost-efficient and faster.

Our patching process is as follows:

  • Delaminated and unsound concrete is removed. 
  • Polyforce Plus Adhesive is applied as an adhesive layer. Its impressive 1.85 MPa adhesive strength ensures monolithic adhesion.
  • Within 40 minutes, the actual patch is applied. On very thin patches (less than a ¼ of an inch), Polyforce Polymer Cement is used; otherwise, regular cement.

Technical Details

Polyforce Plus Adhesive

The use of specialized product, Polyforce Plus Adhesive, permits restoration of the carrying capacity of the slab through monolithic concrete patching and crack repair, providing an alternative to complete slab recasting.

Polyforce Plus coating is tested to provide 25 years of freeze and thaw waterproofing with no degradation and water permeation. This material is rated to expand and contract with concrete, ensuring long-lasting adhesion of concrete patches due to its impressive 1.85 MPa adhesive strength (compared to 1.2 MPa tensile strength of the original concrete). This makes the patch and the old concrete slab work as one.

Polyforce Plus, when mixed with basalt, achieves compressive strength of 150 MPa, making it ideal for surfaces that suffer high mechanical intrusion or increased and prolonged exposure to light acids.

Versatility of application and high strength of installation produce significant cost savings, when compared to traditional concrete repairs.

Polyforce Polymer Cement

Polymer Cement was designed for fast and thin patch applications. When combining patch application of Polymer Cement with high-strength industrial concrete adhesives, many applications which would otherwise be too expensive to execute become cost-effective and feasible. Most typical applications include valley resurfacing, slope reversals, crack repair patches, and stair and balcony repairs.

Polymer Cement is designed to perform in thicknesses ranging from 0.01 inches to 0.25 and beyond. The material performs at 99% dry finish volume.


Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International, Inc.

Our Contacts

22 Jutland Rd, Unit C
Toronto, Ontario, M8Z 2G9
Canada

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416