Project Info

Ash Bridges Bay - Tunnel & Expansion Joint Waterproofing

Ashbridges Bay Wastewater Treatment Plant
Areas Repaired Expansion Joints, Wall / Ceiling Patching and Waterproofing, Crack Injection, Tunnel Waterproofing
Repair Types Polyforce Plus Patching with Basalt and Concrete, Fiberglass Coating, Polyforce Plus Crack Injection, PolyFlex Ledge Beam and Expansion Joint Injection
Issues Active leaks, Membrane Failure, Concrete Delamination, Concrete Cracks

Project Description

This water treatment facility required expansion joint repair of tunnel sections.

Expansion joint repair:
Failure of waterproofing expansion joint rubber inserts in between tunnel sections causes severe water infiltration and joint failure. Choices of repairs in these types of failures are quite limited.

We have applications capable of injecting thin joints to repair failed tunnel section expansion joints. Through specialized injection ports, PolyFlex is supplied into the joint.  When cured, PolyFlex turns into soft rubber. It has tremendous adhesion power capable of binding to concrete, and displacing any accumulated water, not allowing it to re-enter. The concrete slabs can still expand and contract due to the nature of the material injected. At the same time, such injection seals any cracks, preventing any future leaks from recurring.

Technical Details


In accordance with third-party testing, the repaired surfaces are rated to the following:


  • Application of PolyFlex from the negative side reduces cost by 90% when compared to the traditional method of repair
  • 10 years of useful life
  • 0% water permeation
  • PolyFlex is able to expand and compress 200%
  • 200% expansion and compression does not affect adhesion or tensile strength of PolyFlex

Polyforce Plus

  • 25 years of useful life
  • 0% water permeation
  • Polyforce Plus is rated to expand and contract with concrete
  • The entire surface and volume of the slab is "monolithic"
  • Compressive strength of 85 MPa
  • Polyforce Plus mixed with Basalt reaches a compressive strength of 150 MPa
  • Adhesive strength of 1.85 MPa (original concrete has only 1.2 MPa of a tensile strength, so the bond is stronger than the concrete itself)
  • Repair is 60% cost of a traditional repair

Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International, Inc.

Our Contacts

25 Coronet Rd, Unit 8
Etobicoke, Ontario, M8Z 2L8

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416