Project Info

Building Perimeter Waterproofing

Client:
First Liberty Group
2017
Areas Repaired Exterior walls, expansion joints
Repair Types Expansion joints waterproofing
Issues Leaking expansion joints

Project Description

Normally, when there is a failure of waterproofing membrane over the surface of expansion joints, the entire membrane must be removed and reinstalled. The excavation required by the traditional repair method is quite costly, but can be avoided with the use of PolyFlex expansion joint application. 

What we do is drastically different: we drill injection ports and inject our specialized liquid material which turns into soft rubber. It has tremendous adhesion power capable of binding cracked concrete, and displacing any accumulated water, not allowing it to re-enter. The concrete slabs can still expand and contract due to the nature of the materials injected. At the same time, such injection seals any crack in the membrane, preventing any future leaks from recurring.

This type of application method has been proven to create permanent waterproofing with a high degree of success and long-lasting results. Application from within the structure will avoid unnecessary expenses of top-side repair. 
 

Technical Details

Polyforce Plus Adhesive
The use of specialized product, Polyforce Plus Adhesive, permits restoration of the carrying capacity of the slab through monolithic concrete patching and crack repair, providing an alternative to complete slab recasting.

Polyforce Plus coating is tested to provide 25 years of freeze and thaw waterproofing with no degradation and water permeation. This material is rated to expand and contract with concrete, ensuring long-lasting adhesion of concrete patches due to its impressive 1.85 MPa adhesive strength (compared to 1.2 MPa tensile strength of the original concrete). This makes the patch and the old concrete slab work as one. 

Polyforce Plus, when mixed with basalt, achieves compressive strength of 150 MPa, making it ideal for surfaces that suffer high mechanical intrusion or increased and prolonged exposure to light acids.

Versatility of application and high strength of installation produce significant cost savings, when compared to traditional concrete repairs. 

Polyforce Polymer Cement
Polymer Cement was designed for fast and thin patch applications. When combining patch application of Polymer Cement with high-strength industrial concrete adhesives, many applications which would otherwise be too expensive to execute become cost-effective and feasible. Most typical applications include valley resurfacing, slope reversals, crack repair patches, and stair and balcony repairs. 

Polymer Cement is designed to perform in thicknesses ranging from 0.01 inches to 0.25 and beyond. The material performs at 99% dry finish volume. 

Polyforce Plus Primer
High-strength concrete primer is designed for two purposes: concrete waterproofing membrane and primer adhesive layer.

  1. Surface application of Polyforce Primer provides Waterproof Concrete Embedded Membrane rated to withstand 25 years of freeze and thaw cycles.
  2. Increased adhesive qualities of the primer eliminate surface debonding of top coat paint application. 

Polyforce Plus, when mixed with basalt, achieves compressive strength of 150 MPa, making it ideal for surfaces that suffer high mechanical intrusion or increased and prolonged exposure to light acids.

Versatility of application and high strength of installation produce significant cost savings, when compared to traditional concrete repairs. 


Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International, Inc.

Our Contacts

25 Coronet Rd, Unit 8
Etobicoke, Ontario, M8Z 2L8
Canada

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416