Project Info

P2 sp46 - Ledge Beam

Client:
Condominium Living Management
2018

Project Description

Ledge Beam Waterproofing involves the same process as expansion joints, with the added challenge of having to drill through 40 centimeters of Ledge Beam concrete. To ensure proper drilling, a guided rail drill is used. It is essential to make precise calculations, so that drill port will end up in between the concrete slabs at the top of the Expansion Joint opening. Filling the entire volume of the expansion joint with soft rubber will remove all accumulated water, create permanent adhesion to concrete slabs, and follow to the surface membrane crack and seal it. This type of application method has been proven to create permanent waterproofing with a high degree of success and long-lasting results. Application from within the structure will avoid unnecessary expenses of top-side repair. 

Technical Details

Polyforce Plus Adhesive
The use of specialized product, Polyforce Plus Adhesive, permits restoration of the carrying capacity of the slab through monolithic concrete patching and crack repair, providing an alternative to complete slab recasting.

Polyforce Plus coating is tested to provide 25 years of freeze and thaw waterproofing with no degradation and water permeation. This material is rated to expand and contract with concrete, ensuring long-lasting adhesion of concrete patches due to its impressive 1.85 MPa adhesive strength (compared to 1.2 MPa tensile strength of the original concrete). This makes the patch and the old concrete slab work as one. 

Polyforce Plus, when mixed with basalt, achieves compressive strength of 150 MPa, making it ideal for surfaces that suffer high mechanical intrusion or increased and prolonged exposure to light acids.

Versatility of application and high strength of installation produce significant cost savings, when compared to traditional concrete repairs. 

Polyforce Polymer Cement
Polymer Cement was designed for fast and thin patch applications. When combining patch application of Polymer Cement with high-strength industrial concrete adhesives, many applications which would otherwise be too expensive to execute become cost-effective and feasible. Most typical applications include valley resurfacing, slope reversals, crack repair patches, and stair and balcony repairs. 

Polymer Cement is designed to perform in thicknesses ranging from 0.01 inches to 0.25 and beyond. The material performs at 99% dry finish volume. 

Polyforce Plus Primer
High-strength concrete primer is designed for two purposes: concrete waterproofing membrane and primer adhesive layer.

  1. Surface application of Polyforce Primer provides Waterproof Concrete Embedded Membrane rated to withstand 25 years of freeze and thaw cycles.
  2. Increased adhesive qualities of the primer eliminate surface debonding of top coat paint application. 

Polyforce Plus, when mixed with basalt, achieves compressive strength of 150 MPa, making it ideal for surfaces that suffer high mechanical intrusion or increased and prolonged exposure to light acids.

Versatility of application and high strength of installation produce significant cost savings, when compared to traditional concrete repairs. 


Customer Service
Workmenship / Quality
Repair Capital Cost Saving
Issue Remediation
Overall Rating

About Us

Polyforce International, Inc.

Our Contacts

25 Coronet Rd, Unit 8
Etobicoke, Ontario, M8Z 2L8
Canada

Phone: (647) 479-4069
US/Canada Toll Free: 1-855-561-4416