Description
Waterproofing membrane composed of SBS modified bitumen and a composite reinforcement for waterproofing systems for foundations and below grade surfaces.
UNITS PER SKID: 90
Material Use:
COLPHENE STICK LAP is a self-adhesive waterproofing membrane designed for use as a reinforcing strip in below-grade and foundation waterproofing systems. It is particularly suited for detailing work such as inside and outside corners, construction joints, and other critical areas where additional reinforcement is required.
System Components:
COLPHENE STICK LAP is used in conjunction with other COLPHENE waterproofing membranes to form a complete waterproofing system. It must be installed over surfaces that have been primed with SOPRASEAL STICK PRIMER to ensure proper adhesion. The system typically includes:
- Primer: SOPRASEAL STICK PRIMER (required for adhesion to substrate or other membranes)
- Base Membrane: COLPHENE waterproofing membranes (sanded surface)
- Detail Reinforcement: COLPHENE STICK LAP
Applications:
This product is used in foundation and below-grade waterproofing systems, specifically for reinforcing vulnerable areas such as:
- Inside and outside corners
- Construction joints
- Transitions and terminations
- Other detail areas requiring additional waterproofing protection
Application Details:
COLPHENE STICK LAP is a self-adhesive membrane with a sanded top surface and a silicone release film on the underside. Installation involves:
1. Priming the substrate or membrane surface with SOPRASEAL STICK PRIMER.
2. Removing the silicone release film and pressing the membrane into place.
3. Applying even pressure with a membrane roller to ensure full adhesion.
4. Sealing end joints by heat-welding using a propane torch or electric hot-air welder.
Special Notes:
- Thickness: 3.0 mm (120 mils)
- Dimensions: 33 cm x 10 m (13 in x 33 ft)
- Weight: 3.5 kg/m² (0.7 lb/ft²)
- Reinforcement: Composite
- Surface Finish: Sanded
- Underface: Silicone release film
- UV Resistance: Not UV stable; must be protected from prolonged UV exposure
- Temperature Resistance: Remains flexible at temperatures as low as -20 °C (-4 °F)
- Adhesion Strength: 4200 N/m (23.9 lbf/in) to poured concrete at 22 °C (72 °F)
- Puncture Resistance: 1100 N (247 lbf)
- Water Vapour Permeance: < 2.5 ng/Pa•s•m² (< 0.04 perm)
- Water Absorption (24h): < 0.5%
- Hydrostatic Head Resistance: > 110 m (> 360 ft)
- Methane Gas Permeability: 4.06 x 10⁻¹² cm³•cm/cm²•s•Pa
Storage and Handling:
Rolls must be stored upright and protected from direct sunlight. If stored outdoors, they must be covered with an opaque protective cover after removing the delivery packaging.
Limitations:
- Must be installed on primed surfaces for proper adhesion.
- Not intended for use as a standalone waterproofing membrane; it is a detailing component.
- Not UV stable; must be covered or protected after installation.
- Ensure proper surface preparation and environmental conditions during installation to achieve optimal performance.
This product is an essential component in SOPREMA’s foundation waterproofing systems, providing critical reinforcement at vulnerable points to ensure long-term durability and water resistance.
https://www.soprema.ca/en/products-systems/colphene-stick-lap
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.