Residential Repairs

A typical concrete repair and waterproofing scope of work in the private residential sector can include concrete steps, landings and porches, balconies, patios, pool decks, walkways, driveways, parking garages, and basement walls.

Our solutions

Crack Repair

Our industrial-grade materials allow for extensive crack repair on any surface – wall, ceiling, and floor. Crack filler will remain in place thanks to the instant bonding provided by our specialised products, enabling professional applicators to fill both single-defined and multiple cracks.

Our solutions

Patching

Patches done with our professional products will not delaminate – even from ceiling and wall surfaces – thanks to the monolithic adhesion provided. Patching can be done as thinly as 5 mm which allows to restore concrete steps, correct balcony and garage floor slope, waterproof cold joints (any area where two concrete slabs meet), among other concrete repairs.

Our solutions

Waterproofing Membranes

Polyurea-based applications have become more and more popular due to their durability and versatility when it comes to looks. Such membranes can be applied to steps, landings, porches, balconies, pool decks, garage floors, and exterior basement walls – fully sealing and waterproofing the surface and giving it a renewed look. Polyaspartic (one type of polyurea) membranes come in a choice of colours and either a non-UV or UV-protection variety. Flakes can also be added for a unique look.

Application Benefits

01
Low Downtime
Since in most cases concrete slab replacement can be avoided, and only minimal demolition is done, the repair process takes significantly less time. The newly restored surfaces are available for use in 24-48 hours, depending on the product applied.
02
Cost Savings
Less material and time are needed to do the repairs with our industrial-grade products, thus saving on costs. Frequent waterproofing is not necessary because polyurea-based membranes are designed to last for over a decade.
03
Customisable Durable Surface Finish
Polyaspartic topcoats are available in a variety of colours, and flakes can be added for a fully customised look. Non-slip aggregates are broadcast for user safety. A UV-protection topcoat is available to protect the surfaces exposed to direct sunlight (for indoor surfaces, a less expensive non-UV type is advisable).

Repair Methods

A typical work scope can include crack repair, patching, parging, and waterproofing membrane installation.

Durable concrete surface repairs and waterproofing start with proper preparation: all cracks and areas to be patched must be cleaned out, ensuring there are no loose materials which would interfere with adhesion. Cracks are then filled, and patches are installed: our industrial-grade materials allow for thin patch applications – as thin as 5 mm – which makes surface restoration and slope correction possible.

Repair Methods

When requested, a polyurea-based membrane is installed next, coating the entire area in question (steps, balconies, etc.) to ensure lasting waterproofing results. It is a two-layer application: a polyaspartic basecoat is installed is followed by non-slip aggregates broadcast for user safety, and a polyaspartic topcoat follows, which fully seals the surface. Decorative epoxy can also be installed.