Polyeuro 1050H

Polyeuro^® 1050H has NSF-61 approval for direct contact with potable water, and is recommended for use as a coating or lining on suitably primed carbon steel, non-ferrous metal and concrete. Polyeuro^® 1050H offers a tack-free time of less than five minutes and exhibits 20-30% elongation upon curing with 65 Shore D hardness.

 Polyeuro 1050H – Polyurea Polyurethane Copolymer Protective Coating

Polyeuro 1050H is a high-performance, 100% solids, fast-curing polyurea-based protective coating designed for use on properly primed carbon steel, non-ferrous metal, and concrete surfaces. It is NSF-61 approved, allowing for direct contact with potable water, and is ideal for applications requiring chemical, abrasion, and impact resistance.

·       Primer for Concrete and Carbon Steel: Polyprime 3042

·       Base & Finish Coat: Polyeuro 1050H (single coat or multi-layered application)

 This system is suitable for a variety of substrates including concrete, steel, aluminum, wood, and fiberglass, with proper surface preparation and substrate-specific primers as necessary.

 Used in infrastructure and industrial environments including:

·       Water and wastewater treatment facilities

·       Water storage tanks

·       Secondary containment areas

·       Petrochemical and pulp & paper plants

·       Mining facilities, manholes, pipelines, canals, dams, and basins

·       Application Temperature: 40–120°F (4.4–49°C); material must be 5°F above dew point

·       Relative Humidity Limit: <85%

·       Pot Life / Gel Time: 40–80 seconds at 100 ± 10°F

·       Tack-Free Time: <5 minutes @ 70°F

·       Service Ready: 24–48 hours

·       Full Cure: 120 hours

·       Application Method: Heated, plural-component spray system (e.g., Graco Hydra-Cat 45:1)

·       Film Thickness per Coat: 20–100 mils

·       Coverage: ~1600 sqft per gallon at 1 mil; adjust proportionally to thickness

·       Substrate Prep Standards: SSPC-SP10/NACE 2 for steel; ICRI CSP 3-5 for concrete

·       UV Resistance: Not UV stable – may require a topcoat in exterior UV-exposed applications

·       Service Temperature:

o   Dry: up to 180°F (82°C)

o   Immersion: up to 120°F (49°C)

·       Polyeuro 1050H is highly moisture-sensitive once opened; Side-B should be used within 1–2 days

·       The material should not be diluted and must be applied in accordance with equipment specs for effective mixing and cure

·       Not recommended for prolonged exposure to concentrated acids

·       Surface adhesion is critically dependent on proper preparation; adhesion testing is advised for unusual substrates

·       Storage temperature must remain between 60–95°F and avoid freezing

·       This is a professional-use product and best applied by trained installers

https://polycoatusa.com/products.php?productName=Polyeuro%C2%AE%201050H