Description
Self-adhesive base sheet membrane composed of a composite reinforcement and SBS modified bitumen.
UNITS PER SKID: 30
Material Use:
SOPRAPLY FLAM STICK is a high-performance SBS-modified bitumen base sheet membrane designed for use in roofing waterproofing systems. It is primarily used as a base layer in multi-ply roofing assemblies, offering excellent adhesion and durability for both new construction and roof renovation projects.
System Components:
SOPRAPLY FLAM STICK is typically used as part of a multi-layer SBS-modified bitumen roofing system. It is installed over a primed substrate using ELASTOCOL STICK primers, which are essential for proper adhesion. The membrane features a thermofusible plastic film on the top surface and a self-adhesive underface protected by a silicone release film. It is designed to be used in conjunction with a compatible cap sheet membrane (not specified in this TDS but typically another SOPREMA SBS-modified bitumen membrane such as SOPRALENE FLAM or SOPRALENE STICK) to complete the waterproofing system.
Applications:
SOPRAPLY FLAM STICK is suitable for use on flat or low-slope roofs in both commercial and residential buildings. It is ideal for applications where torching is not permitted or practical, such as on combustible substrates or in sensitive environments. It is also suitable for use in both summer and winter conditions, with specific temperature guidelines for each.
Application Details:
- Surface Preparation: Substrates must be clean, dry, and free of loose particles. A primer coat using ELASTOCOL STICK is required before membrane installation.
- Installation Method: The membrane is installed by removing the silicone release film and pressing the membrane onto the primed surface. A membrane roller must be used to ensure full adhesion. For end laps, the thermofusible film must be torched off over the last 150 mm (6 in) before overlapping with the next sheet.
- Minimum Application Temperature:
- Summer Grade: +10 °C (50 °F)
- Winter Grade: -10 °C (14 °F)
- Thickness:
- Overall membrane thickness: Minimum 3.0 mm (118 mils)
- Selvedge thickness: Minimum 3.0 mm (118 mils)
- Dimensions: 10 m x 1 m (33 ft x 3.3 ft)
- Selvedge Width: 75 mm (3 in)
- Reinforcement: Composite reinforcement for added strength and dimensional stability
- Top Surface: Thermofusible plastic film
- Underface: Self-adhesive with silicone release film
Special Notes:
- UV Resistance: As a base sheet, SOPRAPLY FLAM STICK is not intended for UV exposure and must be covered with a compatible cap sheet.
- Storage: Rolls must be stored upright with the selvedge side on top. If stored outdoors, they must be protected with an opaque cover after removing the delivery packaging.
- Puncture Resistance: Passes standard puncture resistance tests.
- Low Temperature Flexibility: Maintains flexibility down to -27 °C (-17 °F), making it suitable for cold climates.
- Dimensional Stability: Excellent dimensional stability with a maximum change of ±0.2%.
- Compatibility: Must be used with ELASTOCOL STICK primer for proper adhesion. Compatible with other SOPREMA SBS-modified bitumen membranes for multi-layer systems.
- Coverage: One roll covers approximately 10 m² (107.6 ft²), not accounting for overlaps.
This product is a key component in SOPREMA’s self-adhered SBS-modified bitumen roofing systems and is ideal for applications requiring flame-free installation methods.
https://www.soprema.ca/en/products-systems/sopraply-flam-stick
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.