Description
URECO TC is a solvent free high build mat finish coating based upon polyurethane technology.
QUANTITY PER PACKAGING: 6 PC
Material Use:
URECO TC is a solvent-free, high-build, matte-finish cementitious polyurethane topcoat designed for use in industrial and commercial flooring systems. It is primarily used as a topcoat over URECO V, URECO STS, and URECO EG base systems, but it can also be applied as a standalone coating in a two-coat system. This product is ideal for environments requiring high chemical resistance, thermal shock resistance, and hygienic, easy-to-maintain surfaces.
System Components:
URECO TC is a three-component system consisting of:
- Part 1: Resin
- Part 2: Hardener
- Part 3: Aggregate (32 mesh quartz)
When used as part of a complete flooring system, URECO TC is applied as the final topcoat over one of the following base systems:
- URECO V (base coat)
- URECO STS (base coat)
- URECO EG (base coat)
No primer is required for URECO TC, and it is applied directly over the prepared base coat or substrate.
Applications:
URECO TC is suitable for a wide range of industrial and commercial applications, particularly in areas where hygiene, chemical resistance, and thermal performance are critical. Typical application areas include:
- Food processing facilities
- Chemical processing plants
- Cook/chill areas
- Bottling and packaging areas
- Sanitize and wash-down zones
- Plant vehicle aisles
Application Details:
- Mixing: Mix full units only. Premix Part 1 (resin), then slowly add Part 3 (aggregate) and mix until lump-free. Add Part 2 (hardener) and mix until homogeneous (approx. 1 minute).
- Application Method: Apply using a squeegee and 10mm nap roller or brush. Push material into the surface and back-roll to achieve uniform 10 mil thickness.
- Coverage: One unit covers approximately 150–160 sq. ft. at 10 mils thickness.
- Pot Life: 15 minutes at 25°C (shorter at higher temperatures).
- Cure Times at 21°C:
- Foot traffic: 8–10 hours
- Recoat: 8–10 hours
- Light wheel traffic: 12–16 hours
- Full service: 18–24 hours
- Service Temperature Range: -120°F to 220°F (intermittent exposure up to 260°F)
- Installation Temperature Range: 5°C to 30°C
- Moisture Limit: Substrate moisture content must not exceed 10%
- Surface Preparation: Substrate must be clean, dry, sound, and profiled to ICRI CSP3 using mechanical methods (e.g., Blastrac, scarifier, or grinder). Use URECO Degreaser to remove oils and contaminants.
Special Notes:
- URECO TC is UV-resistant but not UV-stable; it may discolor under prolonged UV exposure but will maintain performance.
- The product is odorless, non-toxic, and does not require ventilation during application.
- It is compliant with Canadian Food Inspection Agency standards and is resistant to fungi and mold growth.
- URECO TC is self-extinguishing and exhibits excellent adhesion to concrete (>400 psi, concrete fails before bond).
- Storage: Store between 15°C and 21°C in a dry, cool place. Shelf life is 12 months for resin and hardener, and 6 months for aggregate. Avoid moisture contamination, especially in Part 3 (aggregate) and Part 2 (hardener).
- Protective equipment is required during application, including gloves, goggles, and respirators if exposure limits are exceeded.
System Compatibility:
URECO TC is specifically formulated to be used as a topcoat over URECO V, URECO STS, and URECO EG systems, forming a complete cementitious polyurethane flooring system. It can also be used as a standalone system in two coats where appropriate. No primer is required, simplifying installation.
https://www.soprema.ca/en/products-systems/ureco-tc
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.