Description
URECO XTC is a solvent free, non-yellowing, high build, semi-gloss finish coating based upon cementious polyurethane technology.
QUANTITY PER PACKAGING: 6 PC
Material Use:
URECO XTC is a solvent-free, high-build, UV-resistant, semi-gloss finish topcoat designed for use in industrial and commercial flooring systems. It is primarily used as a topcoat over URECO V, URECO STS, and URECO EG base systems, but it can also be applied as a standalone coating system in two coats. This product is ideal for environments requiring high chemical resistance, thermal shock resistance, and UV stability.
System Components:
URECO XTC is a three-component system consisting of:
- Part 1: Resin
- Part 2: Hardener
- Part 3: Aggregate (32 mesh recommended for URECO STS system)
When used as part of a complete flooring system, URECO XTC is applied as the final topcoat over URECO V, URECO STS, or URECO EG base coats. No primer is required for application.
Applications:
URECO XTC is suitable for a wide range of industrial and commercial applications, including:
- Food processing areas (cook/chill zones, proofing ovens, washdown areas)
- Chemical processing and CIP rooms
- Sterilization and sanitation areas
- Refrigeration and freezer storage
- Plant vehicle aisles and parking areas exposed to oils and motor fluids
- Interior and exterior areas with high UV exposure such as balconies, porches, doorways, and parking decks
Application Details:
- Surface Preparation: Substrate must be clean, dry, sound, and profiled to ICRI CSP3 using mechanical methods such as Blastrac, scarifier, or grinder. Use URECO Degreaser to remove oils and contaminants.
- Mixing Instructions: Premix resin (Part 1), then slowly add aggregate (Part 3) and mix until lump-free. Add hardener (Part 2) and mix until homogeneous (approx. 1 minute). Mix full units only.
- Application Method: Apply using a squeegee and 10 mm nap roller or brush at 10 mils wet film thickness. Ensure full surface wetting and uniform thickness. Perimeter areas can be detailed with a brush.
- Coverage: One unit covers approximately 70–80 sq. ft. at 10 mils thickness.
- Pot Life: 15 minutes at 25°C (shorter at higher temperatures).
- Cure Times at 21°C:
- Recoat: 5–6 hours
- Foot traffic: 8–10 hours
- Light wheel traffic: 12–16 hours
- Full service: 18–24 hours
Special Notes:
- Temperature Limits: Apply only between 5°C and 30°C. Do not use below 5°C or above 30°C.
- Moisture Limits: Substrate moisture content must not exceed 10%. Protect from condensation and overhead leaks during application.
- UV Stability: URECO XTC is UV stable and non-yellowing, making it suitable for both interior and exterior applications.
- Chemical Resistance: Excellent resistance to a wide range of chemicals. For specific chemical compatibility, consult the technical department.
- Thermal Resistance: Service temperature range from -120°F to 220°F, with intermittent exposure up to 260°F (live steam).
- Thickness Limits: Recommended application thickness is 10 mils per coat. Two coats are recommended for standalone applications.
- Storage: Store between 15°C and 21°C in a dry, cool place. Shelf life is 12 months for resin and hardener, and 6 months for aggregate. Avoid moisture contamination, especially in Part 3 (aggregate) and Part 2 (hardener).
- Safety: Non-toxic, odorless, and does not require ventilation during application. Use appropriate PPE including gloves, goggles, and respirators as needed.
URECO XTC is a high-performance, UV-stable topcoat that enhances the durability, chemical resistance, and aesthetics of polyurethane cement flooring systems. It is particularly well-suited for demanding environments such as food processing, chemical handling, and areas exposed to thermal shock and UV radiation.
https://www.soprema.ca/en/products-systems/ureco-xtc
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.