Description
Intended for use as an interior/exterior maintenance coating, Metalatex Acrylic Coating is designed for new construction and maintenance applications in light to moderate industrial environments.
Material Use:
Metalatex® Semi-Gloss Coating is a high-performance, 100% acrylic emulsion coating designed for both interior and exterior applications. It is suitable for use in light to moderate industrial environments and is ideal for new construction and maintenance projects. The coating offers mild resistance to alkalis and acids, excellent application characteristics, and is approved for use in USDA-inspected facilities.
System Components:
Metalatex® Semi-Gloss Coating is typically used as a topcoat in a multi-layer system. Depending on the substrate, it is applied over a compatible primer or block filler. The system generally consists of:
- Primer/Base Coat: Varies by substrate (see below)
- Topcoat: 2 coats of Metalatex® Semi-Gloss Coating
Applications:
This coating is recommended for use on a variety of substrates including steel, galvanized and aluminum surfaces, wood, concrete, masonry, and previously painted surfaces. It is suitable for:
- Buildings and warehouses
- Equipment and machinery
- Storage tanks and piping
- Manufacturing facilities
- Interior and exterior surfaces
Application Details:
- Application Methods: Brush, roller, airless spray, or conventional spray
- Reducer: Water (up to 12.5% by volume if needed)
- Recommended Wet Film Thickness (WFT): 4.0–11.0 mils
- Recommended Dry Film Thickness (DFT): 1.5–4.1 mils
- Coverage: 144–395 sq. ft. per gallon depending on thickness; theoretical coverage is 593 sq. ft. per gallon at 1 mil DFT
- Pot Life: Not applicable (water-based acrylic)
- Dry Time at 4.0 mils WFT, 50% RH:
- Touch: 30 minutes @ 77°F
- Handle: 1 hour @ 77°F
- Recoat: 4 hours @ 77°F
- Full Cure Time: Not explicitly stated, but avoid exposure to moisture for 16–24 hours after application
- Temperature Range for Application: Minimum 55°F (12.7°C), Maximum 100°F (38°C); must be at least 5°F above dew point
- Relative Humidity Limit: Maximum 85%
- UV Resistance: Not explicitly UV stable; suitable for exterior use but may require maintenance over time
- Shelf Life: 36 months unopened
- VOC Content: <50 g/L (0.42 lbs/gal), compliant with major environmental regulations
Compatible Primers and Substrate Systems:
- Steel and Rusted Galvanized:
- 1 coat Pro Industrial Pro-Cryl Primer or Pro Industrial DTM Primer/Finish
- 2 coats Metalatex® Semi-Gloss
- Steel with Alkyd Primer:
- 1 coat Kem Bond HS
- 2 coats Metalatex® Semi-Gloss
- Aluminum and Galvanized (Water-Based Primer):
- 1 coat Pro Industrial Pro-Cryl Primer or Pro Industrial DTM Primer/Finish
- 2 coats Metalatex® Semi-Gloss
- Concrete Block (CMU):
- 1 coat Pro Industrial Heavy Duty Blockfiller
- 2 coats Metalatex® Semi-Gloss
- Concrete and Masonry:
- 1 coat Loxon Concrete and Masonry Primer or Loxon Conditioner
- 2 coats Metalatex® Semi-Gloss
- Drywall:
- 1 coat ProMar 200 Zero VOC Primer
- 2 coats Metalatex® Semi-Gloss
- Prefinished Siding (Baked-on Finishes):
- 1 coat DTM Bonding Primer
- 2 coats Metalatex® Semi-Gloss
- Previously Painted Surfaces:
- 2 coats Metalatex® Semi-Gloss (test adhesion if surface is glossy or unknown)
- Wood (Exterior):
- 1 coat Exterior Wood Primer
- 2 coats Metalatex® Semi-Gloss
- Wood (Interior):
- 1 coat Premium Wall and Wood Primer
- 2 coats Metalatex® Semi-Gloss
Special Notes:
- During early curing (first 16–24 hours), the coating is sensitive to rain, dew, and high humidity. Plan application accordingly.
- Surface preparation is critical for performance. Follow SSPC standards for cleaning and preparation.
- For best results, stripe coat welds, crevices, and sharp angles before full application.
- Not LEED v4 emissions certified, but compliant with VOC limits for LEED v4 and v4.1.
- Clean tools and equipment with soap and warm water immediately after use.
- Not recommended for immersion service or continuous high-temperature exposure.
- Performance testing shows excellent adhesion (906 psi), abrasion resistance, and flexibility.
This product is a versatile, low-VOC, water-based acrylic coating suitable for a wide range of industrial and commercial applications, especially where environmental compliance and ease of application are priorities.
https://www.sherwin-williams.com/painting-contractors/products/metalatex-acrylic-coating
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.