Description
Mixture of two-component liquid resin made from polymethyl methacrylate (PMMA) and microfibers used as a waterproof paste in locations where it is difficult to install a liquid membrane system with reinforcement.
UNITS PER SKID: 80
Material Use:
ALSAN RS DETAILER is a two-component, fiber-reinforced, polymethyl methacrylate (PMMA)-based liquid resin used primarily as a waterproofing paste. It is specifically designed for use in detailing areas where it is difficult to install a reinforced liquid membrane system, such as corners, penetrations, and other complex geometries. It serves as an accessory product within the ALSAN RS waterproofing system.
System Components:
ALSAN RS DETAILER is used in conjunction with other ALSAN RS products, including primers, membranes, and topcoats. It must be catalyzed with ALSAN RS CATALYST POWDER prior to application. While it is not a standalone membrane, it integrates into the ALSAN RS system as a detailing component. The complete system may include:
- Primer: ALSAN RS Primer (specific type depends on substrate)
- Base Coat: ALSAN RS 230 or similar PMMA membrane
- Detailing Paste: ALSAN RS DETAILER
- Topcoat (if required): ALSAN RS 260 or other compatible ALSAN RS topcoats
Applications:
ALSAN RS DETAILER is used in roofing and waterproofing applications, particularly for detailing work around penetrations, upturns, and other areas where standard membrane application is not feasible. It is suitable for use on a variety of substrates, provided they are properly prepared and primed.
Application Details:
- Mixing: Mix the entire container of resin for two minutes using a slow-speed (200–400 rpm) mechanical agitator before use. Add the appropriate amount of ALSAN RS CATALYST POWDER based on ambient temperature (refer to Catalyst Mixing Chart). Stir for an additional two minutes after adding catalyst.
- Application Method: Apply using a brush or spatula to clean, dry, and prepared surfaces. Spread evenly to ensure full coverage.
- Coverage Rate: Approximately 3 kg/m² (0.28 kg/ft²)
- Pot Life: 20 minutes at 20°C (68°F)
- Rain Proof Time: 30 minutes
- Set Time / Walkable / Next Layer: 60 minutes
- Full Cure Time: 3 hours
- Ambient Temperature Range for Application: 3°C to 35°C (37°F to 95°F)
- Catalyst Dosage: Varies from 2% to 6% depending on temperature (see Catalyst Mixing Chart)
- Viscosity: >5,000 cps at 25°C
- Hardness: Shore A 73
- Abrasion Resistance: 245 mg loss (ASTM D4060)
Special Notes:
- ALSAN RS DETAILER is only available in Pebble Grey.
- This product is not UV stable on its own and should be overcoated with a UV-resistant topcoat if exposed to sunlight.
- Store in a cool, dry, and ventilated area between 0°C and 25°C (32°F to 77°F). Do not expose to direct sunlight. Shelf life is approximately 12 months when stored properly.
- ALSAN RS DETAILER is part of a system and should not be used as a standalone waterproofing membrane.
- Ensure all surfaces are clean, dry, and free of contaminants before application. Use appropriate primer based on substrate type.
- Application thickness is not specified in mils due to its paste-like consistency, but coverage rate should be used to estimate material needs.
This product is ideal for use in conjunction with ALSAN RS membranes and topcoats to ensure a fully reinforced, seamless, and durable waterproofing system, especially in complex or detailed areas.
https://www.soprema.ca/en/products-systems/alsan-rs-detailer
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.