Description
Polyurethane-based, two-component, 100% solids, dark grey or light grey resin used as a protective wearing course or as a finishing layer in ALSAN TRAFIK and ALSAN LIGHT TRAFIK systems.
UNITS PER SKID: 18
Material Use:
ALSAN TRAFIK HP 535 is a two-component, aliphatic polyurethane-based resin designed as a wearing course and finishing layer in vehicular and pedestrian traffic waterproofing systems. It is primarily used in the ALSAN DECK 220 system for parking decks, balconies, and plaza decks. The product is 100% solids, VOC-free, odourless, and self-leveling, making it suitable for both indoor and outdoor applications where durability and aesthetics are required.
System Components:
ALSAN TRAFIK HP 535 is used in conjunction with the following system components:
- Primers: ALSAN TRAFIK HP 121 or ALSAN FLOOR EP 101
- Waterproofing Membrane (Base Coat): ALSAN TRAFIK PU 221
- Top Coat (Wearing Surface): ALSAN TRAFIK HP 535
- Aggregate (for non-slip finish): Silica sand (24-32 mesh), applied either on the fly or to full saturation depending on traffic conditions
Applications:
This material is ideal for use in:
- Parking decks
- Balconies
- Plaza decks
- Ramps and areas subject to heavy vehicular traffic
Application Details:
- Mixing: Stir Part A and Part B separately for 2–3 minutes. Combine Part B into Part A and mix for another 2–3 minutes until homogeneous.
- Application Method: Apply using a notched squeegee and level with a roller.
- Recommended Thickness: 355 µm (14 mils) wet film thickness
- Coverage: Approximately 375 ft² per 3.3 US gallons (12.5 L) at 14 mils
- Silica Sand Application:
- Light traffic: 15–20 lbs/100 ft² (on the fly)
- Heavy traffic: 50–70 lbs/100 ft² (full saturation)
- Second Coat: If a second coat is required, the first coat must be fully saturated with silica sand to ensure proper adhesion.
Special Notes:
- Pot Life: 30 minutes at 20 °C (68 °F)
- Curing Time:
- 9 hours at 20 °C (68 °F)
- 3 hours at 30 °C (86 °F)
- Full Cure Time: 72 hours before allowing traffic
- Application Temperature: Minimum 5 °C (41 °F); must be maintained throughout curing
- UV Resistance: As an aliphatic polyurethane, ALSAN TRAFIK HP 535 is UV stable and suitable for exposed applications
- Substrate Limitations: Not suitable for application over plywood
- Storage: Store in original containers above 10 °C (50 °F); shelf life up to 18 months
- Cleaning: Tools can be cleaned with ALSAN RS CLEANER, acetone, or petroleum solvents (e.g., mineral spirits, xylene)
ALSAN TRAFIK HP 535 is a high-performance, durable topcoat designed for use in multi-layer waterproofing systems where long-term wear resistance, UV stability, and non-slip surface finishes are required. It integrates seamlessly with SOPREMA’s ALSAN TRAFIK and FLOOR systems, offering a complete solution for vehicular and pedestrian traffic areas.
https://www.soprema.ca/en/products-systems/alsan-trafik-hp-535
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.