Description
HiBAR CONCENTRATED ADHESIVE is part of a multi-component system which, when mixed with water, promotes adhesion of the HiBAR product.
UNITS PER SKID: 36
Material Use:
HiBAR Concentrated Adhesive is a liquid bonding agent designed to promote adhesion of HiBAR products to various building substrates. It is a key component in the HiBAR system and must be mixed with water prior to application. This adhesive is used primarily in roofing and other construction applications where HiBAR products are applied.
System Components:
HiBAR Concentrated Adhesive is part of a multi-component system and is specifically formulated to be used in conjunction with HiBAR products. It acts as a primer or bonding layer to ensure proper adhesion of the HiBAR material to the substrate. The system includes:
- HiBAR Concentrated Adhesive (used as a primer)
- HiBAR Product (applied over the adhesive)
Applications:
This adhesive is suitable for use on most common building materials, including concrete, masonry, and other compatible substrates. It is typically used in roofing systems and other construction applications where HiBAR products are installed.
Application Details:
Before application, all surfaces must be clean, dry, and free of oil, grease, dirt, and loose materials. The adhesive is prepared by mixing one part HiBAR Concentrated Adhesive with four parts water (e.g., 19 L of adhesive with 76 L of water) until a homogeneous consistency is achieved. The mixture is then sprayed in a thin layer onto the substrate. The HiBAR product must be applied while the adhesive is still tacky.
- Application Temperature: Must be above 4°C (39°F)
- Coverage Rate: 1200 to 1900 ft² per 19 L (5 US gallons) container
- Pot Life (Shelf Life): 12 months when stored in original, sealed container in a ventilated area away from heat and sunlight
Special Notes:
HiBAR Concentrated Adhesive is not a standalone product and must be used as part of the HiBAR system. It is not UV stable and should be covered by the HiBAR product or other protective layers. The adhesive must be applied in a thin layer and should not be used in conditions below 4°C. Proper mixing and surface preparation are critical to ensure optimal performance. Always consult your SOPREMA representative for complete application guidelines and compatibility
https://www.soprema.ca/en/products-systems/hibar-concentrated-adhesive
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.