Description
SOPRA-XPS 40 is a rigid thermal insulation board made of high-density extruded polystyrene with squared edges on its four sides.
ITEMS PER SKID:
Depends on thickness:
1" straight board - 88
1.5" straight board - no info
2" Channels on bottom long square edges - 48
2" straight board - 48
2.5" straight board - 36
3" Channels on bottom long square edges - 32
3" straight board - 32
3.5" ship lapped 4 sides
Material Use:
SOPRA-XPS 40 and SOPRA-XPS 40 PL are high-density extruded polystyrene (XPS) thermal insulation boards designed for use in heavy-load applications. These rigid insulation boards are primarily used in foundation systems, under concrete slabs, protected-membrane roofing systems (inverted roofs), parking decks, and plaza decks. SOPRA-XPS 40 PL is specifically engineered for plaza deck systems and includes channeled edges to facilitate water drainage.
System Components:
These insulation boards are typically used as part of SOPREMA’s foundation and roofing systems. They can be installed in combination with SOPRASEAL LM 200 T adhesive or other adhesives compatible with extruded polystyrene. In multi-layer applications, boards should be installed with staggered joints and may be temporarily adhered using the aforementioned adhesives. SOPRA-XPS 40 PL is used in plaza deck systems where drainage is critical, thanks to its channeled edge design.
Applications:
SOPRA-XPS 40 and 40 PL are suitable for a wide range of construction applications including:
- Below-grade foundation insulation
- Under-slab insulation
- Protected-membrane (inverted) roofing systems
- Parking decks
- Plaza decks
Application Details:
- Installation Method: Boards can be loose-laid or adhered using SOPRASEAL LM 200 T or a compatible adhesive.
- Board Dimensions: 2438 mm x 610 mm (8 ft x 2 ft)
- Available Thicknesses: SOPRA-XPS 40: 25 mm (1 in) to 102 mm (4 in); SOPRA-XPS 40 PL: 51 mm (2 in) and 76 mm (3 in)
- Edge Types: SOPRA-XPS 40: butt edges; SOPRA-XPS 40 PL: channeled long edges and butt short edges
- Thermal Resistance (R-value): R-5.0 per inch at 24°C (75°F)
- Compressive Strength: Minimum 275 kPa (40 psi)
- Flexural Strength: Minimum 800 kPa (116 psi)
- Water Absorption: Max 0.6% (ASTM D2842), 0.1% (ASTM C272)
- Water Vapour Permeance: 0.61 perm (35 ng/Pa•s•m²)
- Maximum Service Temperature: 75°C (167°F)
Special Notes:
- UV Exposure Limit: Boards must not be exposed to UV rays for more than 60 days. If stored outdoors, they must be covered with an opaque protective cover.
- Environmental Impact: SOPRA-XPS 40 and 40 PL contain no CFCs, HCFCs, or HFC-134a, and have zero ozone depletion potential with a very low global warming potential (GWP of 1). They are GREENGUARD GOLD certified and contain both pre-consumer and post-consumer recycled content.
- Fire Performance: Flame spread rating < 500 (CAN/ULC-S102.2)
- Storage: Store flat in original packaging. Keep away from flames and intense heat sources.
- Certifications: Compliant with ASTM C578-14 Type VI and CAN/ULC S701.1 Type 4. Also meets various UL and CSA standards for fire exposure and roofing system compatibility.
SOPRA-XPS 40 and 40 PL are essential components in high-performance insulation systems where durability, compressive strength, and moisture resistance are critical. Their compatibility with SOPREMA adhesives and systems makes them a reliable choice for both horizontal and vertical insulation applications in commercial and civil construction.
https://www.soprema.ca/en/products-systems/sopra-xps-40
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.