CCS Coating, FC is a high-build, two-component epoxy coating designed for direct food contact applications with dry bulk and aqueous foods. It is suitable for both floor and wall surfaces and offers excellent resistance to chemicals, wear, and skid/slip. This coating complies with FDA 21 CFR 175.300 for food contact and is appropriate for concrete, steel, and wood substrates.

 The system includes two components: Part A (resin) and Part B (hardener) in a 2:1 volume mix ratio. It can be used with broadcast aggregates (recommended mesh sizes #20x40 or #30x50) to enhance slip resistance and durability. No primer is required, and the coating bonds to dry, damp, or wet (no standing water) substrates.

 Recommended for facilities requiring chemical resistance and food safety, such as food processing areas, storage, industrial plants, and vehicle or pedestrian traffic zones. It performs well on concrete, steel, and wood surfaces and is freeze/thaw resistant for outdoor use.

·         Mix Ratio: 2:1 by volume (Part A: Part B)

·         Application Tools: Stiff bristle brush, short nap roller, squeegee, or two-component spray equipment

·         Coating Thickness:

o        Floor/wall coatings: 2-3 coats at 10 mils per coat

o        Floor surfacings: Single/multiple coats at 20–30 mils per coat

·         Coverage:

o        At 10 mils: ~160 sq ft/gallon

o        At 20 mils: ~80 sq ft/gallon

o        At 30 mils: ~53 sq ft/gallon

·         Pot Life (Gel Time): ~120 minutes for 100g mass

·         Set Time: ~4.5 hours

·         Recoat Time:

o        60°F: 8–72 hours

o        73°F: 4–36 hours

o        90°F: 2–18 hours

·         Substrate Temperature: Minimum 50°F during application

·         Full Cure: 7 days at 73°F

·         No primer is necessary, simplifying installation.

·         Material should not be thinned or mixed with solvents.

·         UV Exposure: Does not embrittle in sunlight but may chalk slightly.

·         Chemical Resistance: Excellent resistance to a wide range of chemicals including salts, oils, fuels, and cleaning agents. Limited resistance to organic solvents and should not be used under prolonged exposure to strong acids, alkalis, or hot water above 180°F without testing.

·         Storage: Minimum 3-year shelf life in unopened containers at 60–90°F.

·         Health & Safety: Part A and B have moderate to serious hazard ratings. Proper PPE (gloves, glasses, ventilation) is essential during handling.