Description
Pro Industrial™ Alkyd Dryfall is a modified alkyd, intense white paint for interior use. Overspray dries to a removable dust within eight feet @ 77°F (25°C) and 50% relative humidity.
Material Use:
Pro Industrial™ Alkyd Dryfall Eg-Shel is a fast-drying, interior-use alkyd-based coating designed for commercial and industrial environments. It is specifically formulated to dry quickly in the air and fall as a removable dust within approximately 8 feet of application, making it ideal for overhead spray applications where overspray control is critical. This product is suitable for use in USDA-inspected facilities and offers high light reflectance (86%), making it ideal for brightening large interior spaces.
System Components:
This coating is typically used as a topcoat in a multi-component system. Depending on the substrate, it must be applied over a compatible primer. The system generally includes:
- Primer (substrate-specific, see below)
- 1–2 coats of Pro Industrial Alkyd Dryfall Eg-Shel as the finish coat
Applications:
Pro Industrial Alkyd Dryfall is recommended for use in warehouses, manufacturing facilities, gymnasiums, textile mills, and other industrial, commercial, and institutional buildings. It is suitable for application on properly prepared structural steel, galvanized metal, drywall, plaster, concrete, masonry, and wood.
Application Details:
- Application Method: Airless or conventional spray only. Brush and roller application are not recommended.
- Recommended Wet Film Thickness: 6.0–10.0 mils
- Recommended Dry Film Thickness: 2.9–4.8 mils
- Coverage: 160–265 sq. ft. per gallon at recommended thickness
- Theoretical Coverage: 769 sq. ft. per gallon at 1 mil dry film thickness
- Pot Life: Not applicable (single-component product)
- Dry Time @ 77°F (25°C), 50% RH, 6.0 mils wet:
- To touch: 15 minutes
- To recoat: 18 hours
- To full cure: 3 days
- Dry fallout distance: 8 feet
- Temperature Range for Application: Minimum 50°F (10°C), maximum 100°F (37°C); surface, air, and material must be at least 5°F above dew point
- Relative Humidity Limit: Maximum 75%
- UV Resistance: Not UV stable; interior use only
- VOC Content: 399 g/L (3.33 lbs/gal)
- Shelf Life: 12 months unopened
- Flash Point: 86°F (PMCC)
Primers and Compatible Systems:
The following primers are recommended based on substrate type:
- Steel: Pro Industrial Pro-Cryl® Primer or Pro Industrial Kem Bond® HS Primer
- Aluminum: Pro Industrial DTM Wash Primer
- Galvanized Metal: Pro Industrial DTM Wash Primer
- Concrete Block (CMU): Pro Industrial Heavy Duty Block Filler or Loxon® Acrylic Block Surfacer
- Concrete, Masonry, Plaster: Loxon® Concrete & Masonry Primer
- Drywall: ProMar® 200 Zero VOC Primer
- Wood (Interior): Premium Wall & Wood Primer
Each of these systems is completed with 1–2 coats of Pro Industrial Alkyd Dryfall Eg-Shel.
Special Notes:
- Do not tint this product.
- Overspray may adhere to hot surfaces; remove immediately to prevent permanent adhesion.
- Not suitable for exterior use or areas exposed to UV light.
- Ensure proper surface preparation as per SSPC or ICRI standards depending on substrate.
- Clean tools and equipment immediately after use with a compliant solvent.
- Rags and waste soaked with this product may spontaneously combust; dispose of properly in a sealed, water-filled metal container.
This product is intended for professional use only and should be applied by trained personnel familiar with industrial coating systems. Always consult the most recent product data sheet and safety data sheet before use.
https://www.sherwin-williams.com/painting-contractors/products/pro-industrial-alkyd-dryfall
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.