Description
Pro Industrial™ Alkyd Dryfall is a modified alkyd, intense white paint for interior use. Overspray dries to a removable dust within eight feet @ 77°F (25°C) and 50% relative humidity.
Material Use:
Pro Industrial™ Alkyd Dryfall is a high-performance, modified alkyd-based interior coating designed for use in commercial, industrial, and institutional environments. It is specifically formulated for overhead spray applications where overspray is a concern, as it dries to a removable dust within eight feet under standard conditions. This product is ideal for ceilings and overhead structures in facilities such as warehouses, manufacturing plants, gymnasiums, and textile mills.
System Components:
This coating system typically includes a primer appropriate to the substrate, followed by one to two coats of Pro Industrial Alkyd Dryfall. The system components vary depending on the substrate:
- Steel: 1 coat of Pro Industrial Pro-Cryl® Primer or Kem Bond® HS Primer, followed by 1–2 coats of Pro Industrial Alkyd Dryfall.
- Aluminum & Galvanized Metal: 1 coat of Pro Industrial DTM Wash Primer, followed by 1–2 coats of Pro Industrial Alkyd Dryfall.
- Concrete Block (CMU): 1 coat of Pro Industrial Heavy Duty Block Filler or Loxon® Acrylic Block Surfacer, followed by 1–2 coats of Pro Industrial Alkyd Dryfall.
- Concrete, Masonry, Plaster: 1 coat of Loxon® Concrete & Masonry Primer, followed by 1–2 coats of Pro Industrial Alkyd Dryfall.
- Drywall: 1 coat of ProMar® 200 Zero VOC Primer, followed by 1–2 coats of Pro Industrial Alkyd Dryfall.
- Interior Wood: 1 coat of Premium Wall & Wood Primer, followed by 1–2 coats of Pro Industrial Alkyd Dryfall.
Applications:
This product is intended for interior use only and is suitable for a wide range of substrates including structural steel, galvanized metal, drywall, plaster, concrete, masonry, and wood. It is commonly used in large-scale commercial and industrial settings where high light reflectance and easy cleanup of overspray are desired.
Application Details:
- Application Method: Airless or conventional spray only. Brush and roller application are not recommended.
- Airless Spray Settings: Minimum 2500 psi, 1/4" I.D. hose, 0.017–0.019" tip, 60 mesh filter.
- Conventional Spray Settings: Binks 95 gun, 66 fluid nozzle, 66 PE air nozzle, 50 psi atomization pressure, 25 psi fluid pressure.
- Film Thickness:
- Wet: 6.0–7.0 mils
- Dry: 2.9–3.4 mils
- Coverage: 230–270 sq. ft. per gallon at recommended thickness. Theoretical coverage is 785 sq. ft./gal at 1 mil dry film thickness.
- Dry Time at 77°F (25°C), 50% RH:
- To touch: 10 minutes
- Recoat: 2–6 hours (or after 18 hours)
- Full cure: 3 days
- Dry fall out: 8 feet
- Pot Life: Not applicable (single-component product).
- Temperature Range for Application: Minimum 50°F (10°C), maximum 100°F (37°C); surface must be at least 5°F above dew point.
- Humidity Limit: Maximum 85% relative humidity.
- VOC Content: 360 g/L (3.01 lbs/gal)
- Volume Solids: 49 ±2%
- Weight Solids: 70 ±2%
- Weight per Gallon: 11.38 lbs
- Flash Point: 55°F (PMCC)
- Shelf Life: 24 months unopened
- UV Resistance: Not UV stable – interior use only.
- Cleanup: Use compliant cleanup solvent immediately after use. Flush spray equipment thoroughly to prevent clogging.
Special Notes:
- This product is for professional use only and is not suitable for exterior applications due to lack of UV stability.
- Overspray may adhere to hot surfaces; remove immediately to prevent permanent bonding.
- Tinting is possible with BAC colorants (0–2 oz/gal), but may affect dryfall characteristics.
- Surface preparation is critical for performance. All surfaces must be clean, dry, and properly primed.
- Not compliant with all environmental regulations (e.g., SCAQMD, LEED v4 VOC limits).
- Rags and waste soaked with this product may spontaneously combust; dispose of properly in a sealed, water-filled metal container.
- Always consult the most recent TDS and SDS before use.
This product is best used as part of a complete Sherwin-Williams system tailored to the substrate, ensuring optimal adhesion, durability, and performance in demanding interior environments.
https://www.sherwin-williams.com/painting-contractors/products/pro-industrial-alkyd-dryfall
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.