Description
Pro Industrial™ Waterbased Acrolon™ 100 is an advanced technology, less than 100 grams per liter V.O.C., waterbased, acrylic urethane. It provides performance properties comparable to premium quality solvent-based urethanes. This is an abrasion resistant urethane that has excellent weathering properties
Material Use:
Pro Industrial Acrolon 100 is a high-performance, water-based acrylic urethane coating designed for use in commercial and industrial environments. It is ideal for applications requiring excellent abrasion resistance, weatherability, and chemical resistance. This product is suitable for both interior and exterior use and is compliant with stringent VOC regulations (less than 100 g/L). It is especially well-suited for use in USDA-inspected and Canadian food processing facilities (non-food contact areas).
System Components:
Pro Industrial Acrolon 100 is a two-component system mixed at a 6:1 ratio by volume (Part A: B65–420 Series, Part B: B65V00620). It may be used as a topcoat over a variety of primers and base coats depending on the substrate. The system may also include intermediate coats such as Macropoxy® 646-100 for enhanced corrosion resistance. The Ultradeep Tint Base (B65T00424) can be used as a clear coat.
Applications:
This coating system is designed for use on steel, aluminum, galvanized metal, concrete, masonry, drywall, and pre-finished siding. It is commonly used in commercial buildings, healthcare cleanrooms, food processing facilities, and industrial environments where durability and chemical resistance are critical.
Application Details:
- Mixing Ratio: 6 parts Part A to 1 part Part B by volume. Mix thoroughly before use.
- Application Methods: Airless spray (2000 psi, 0.013–0.015" tip), brush (nylon-polyester), or roller (3/8" woven).
- Reduction: Up to 15% with water; 5–15% reduction required for brush and roll applications.
- Recommended Film Thickness:
- Wet: 4.0–8.0 mils
- Dry: 1.8–3.5 mils
- Coverage: 200–400 sq. ft. per gallon depending on substrate and application method.
- Pot Life:
- 55°F: 3 hours
- 77°F: 2.5 hours
- 120°F: 1 hour
- Dry Time @ 5.0 mils wet, 50% RH:
- Touch: 1.5 hrs @ 77°F
- Handle: 6 hrs @ 77°F
- Recoat: Min 8 hrs, Max 3 months (surface abrasion required if exceeded)
- Full Cure: 10 days @ 77°F
- Temperature & Humidity Limits:
- Application temperature: 55°F to 120°F (13°C to 49°C)
- Must be at least 5°F above dew point
- Max relative humidity: 85%
- UV Resistance: UV stable after cure
- Shelf Life: 24 months unopened
- VOC Content: 78 g/L (0.65 lbs/gal) as mixed
Compatible Primers and Base Coats by Substrate:
- Steel:
- Pro Industrial Pro-Cryl® Primer
- Pro Industrial Kem Bond HS®
- Zinc Clad® IV (with or without Macropoxy® 646-100 intermediate coat)
- Aluminum & Galvanized Metal:
- Pro Industrial DTM Wash Primer
- Concrete Block (CMU):
- Pro Industrial Heavy Duty Block Filler
- Loxon® Acrylic Block Surfacer
- Concrete (High Performance):
- Kem-Cati-Coat® HS Epoxy Filler-Sealer
- Cement-Plex® 875 WB Block Filler
- Smooth Concrete & Masonry:
- Loxon® Concrete and Masonry Primer
- Drywall:
- ProMar® 200 Zero VOC Primer
- For cleanroom applications:
- 2 coats Pro Industrial Water Based Catalyzed Epoxy
- 1 coat Pro Industrial Acrolon 100
- Pre-Finished Siding:
- Pro Industrial Bond-Plex® Waterbased Acrylic
Special Notes:
- This product is suitable for USDA and Canadian food processing facilities in non-food contact areas.
- The Ultradeep Tint Base can be used as a clear coat.
- For best results, stripe coat welds, crevices, and sharp angles.
- Surface preparation is critical; follow SSPC and ICRI guidelines for each substrate.
- Do not exceed pot life; do not mix previously catalyzed material with new.
- Clean tools and equipment immediately after use with soap and warm water.
- Excellent chemical resistance to acids, bases, alcohols, oils, and cleaning agents.
- Not EPD-NSF certified or listed in Manufacturer Inventory Reporting (MIR).
This system offers a durable, low-VOC, water-based alternative to solvent-based urethanes, with excellent performance in demanding environments. It is ideal for use as a final topcoat in multi-layer protective systems across a wide range of substrates.
https://www.sherwin-williams.com/painting-contractors/products/pro-industrial-acrolon-100-hs-waterbased-urethane
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.