Description
SETFAST® Solventborne Acrylic Traffic Marking Paint is a conventional dry (non-heat applied) acetone based paint.
Material Use:
Setfast® Acrylic Solventborne Traffic Marking Paint is a fast-drying, 100% acrylic, acetone-based traffic marking paint designed for use on cured asphalt, concrete, and brick surfaces. It is ideal for striping applications such as parking lots, curbs, runways, and airfields. This solventborne paint is formulated for high performance, offering quick hardness development, reduced dirt pickup, and improved durability, making it suitable for both commercial and municipal applications.
System Components:
This is a single-component system that does not require a primer or topcoat. It can be used alone or in conjunction with glass beads for reflective markings. The paint is available in two standard colors: TM5626 White and TM5627 Yellow. No additional base or final coats are required, and no reducer is recommended for thinning.
Applications:
Setfast® Acrylic is recommended for use in shopping centers, municipalities, property and plant maintenance, asphalt seal contractors, pavement stripers, and airfields. It is suitable for marking cured asphalt, concrete, and brick surfaces. It can be applied using airless spray line stripers, conventional spray equipment, or by brush/roller for small areas. It is also compatible with stencils for custom markings.
Application Details:
- Surface Preparation: Surfaces must be clean, dry, and sound. Remove all oil, dust, grease, dirt, and loose materials. New asphalt should be aged before application to prevent bleeding. A test stripe is recommended on fresh asphalt.
- Application Temperature: Minimum 40°F (4.5°C), maximum 90°F (32°C); at least 5°F above dew point.
- Relative Humidity: Maximum 85%.
- Application Method: Airless spray (1500–2000 psi, 0.015–0.019 inch tip), conventional spray, or brush/roller for small areas.
- Film Thickness: 15.0 mils wet, 7.2 mils dry.
- Coverage: Approximately 320 lineal feet of a standard 4-inch stripe per gallon, or 107 sq. ft. per gallon. Theoretical coverage is 770 sq. ft. per gallon.
- Dry Time (at 77°F / 25°C, 50% RH):
- Dry-no-pickup: Max 5 minutes
- Dry to touch: Max 5 minutes
- Pot Life: Not applicable (single-component, ready-to-use).
- Cure Time: Fast-drying; full cure not explicitly stated but typically within minutes under proper conditions.
- Shelf Life: 12 months unopened.
- Storage Conditions: Store indoors between 40°F (4.5°C) and 90°F (32°C).
Special Notes:
- This product is not UV-stable or UV-resistant by specification, but it is designed for exterior use and performs well under typical outdoor conditions.
- Not intended for use as a floor paint or for large pedestrian areas due to potential slipperiness when wet.
- Can be made reflective by applying glass beads while the paint is still wet.
- Excessive reduction or application below the recommended film thickness may compromise performance.
- Clean tools and equipment with acetone or compliant solvent immediately after use.
- Complies with various environmental regulations including OTC, SCAQMD, CARB, and MPI standards.
- VOC content: 73 g/L (White), 88 g/L (Yellow), compliant with many regional standards.
- Flash Point: -3°F PMCC – flammable; handle with care.
- Not LEED v4 VOC compliant.
This material is best used as a standalone striping solution for cured horizontal surfaces and is not part of a multi-layer coating system. It is ideal for quick-turnaround marking jobs where fast dry time and durability are essential.
https://www.sherwin-williams.com/painting-contractors/products/setfast-solventborne-acrylic-traffic-marking-paint
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.