Sikafloor - 2002

Sikafloor®-2002 is a two-component, clear epoxy resin designed primarily as a binder and top coat in decorative flooring systems. It is ideal for use in multicoloured systems such as Sikafloor® Quartzite®, DecoFlake®, and Metallic FX®. The product is intended for light to heavy traffic areas, including hospitals, healthcare facilities, retail spaces, manufacturing facilities, commercial kitchens, laboratories, offices, and cultural venues.

Sikafloor®-2002 is typically used in conjunction with other Sikafloor® systems. It acts as both a binder and top coat for systems like Sikafloor® Quartzite®, DecoFlake®, and Metallic FX®. For substrates with high moisture content (>4%), primers such as Sikafloor®-1610, Sikafloor®-81 EpoCem® CA, or Sikafloor® 22NA/24 NA PurCem® must be used prior to applying Sikafloor®-2002.

The product is applied to interior concrete surfaces where aesthetics, chemical resistance, and durability are required. It is not recommended for exterior use or environments with direct sunlight exposure, freeze/thaw conditions, or negative-side waterproofing requirements.

• Mix Ratio: 2:1 (A:B by volume)
• Application Tools: Non-marking squeegee or flexible steel trowel followed by backrolling
• Coverage: 80 to 160 ft²/US gal (10-20 mils wet film thickness)
• Substrate Preparation: Mechanically prepare concrete to CSP 3–4 profile; compressive strength ≥ 25 MPa, tensile strength ≥ 1.5 MPa
• Substrate Moisture: Must be < 4% pbw; relative humidity ≤ 85% per ASTM F2170

• Pot Life:
• 10 °C: ~50 minutes
• 20 °C: ~25 minutes
• 30 °C: ~15 minutes
• Curing Time (Foot Traffic / Light / Full Cure):
• 10 °C: 24 hrs / 3 days / 10 days
• 20 °C: 8 hrs / 2 days / 7 days
• 30 °C: 6 hrs / 36 hrs / 4 days
• Environmental Conditions:
• Application Temp: 10–30 °C (50–86 °F)
• Material Temp: 18–24 °C (65–75 °F)
• Max Humidity: 85%
• Substrate must be ≥3 °C above dew point to avoid condensation
• Limitations:
• Not UV stable
• For interior use only
• Avoid direct-fired gas heaters to prevent surface defects
• Substrate aggregates must be non-reactive
• Requires protection from moisture for at least 72 hours post-application
• Finish Properties:
• Gloss Level: ~90 (60° angle)
• DCOF: ~0.92 dry, ~0.32 wet
• Shore D Hardness: ~80
• VOC Content: < 25 g/L

Sikafloor®-2002 provides a seamless, high-gloss finish with excellent mechanical and chemical resistance. It is easy to clean and does not support microbial growth, making it suitable for hygienic environments.

Not on their website - only PDF available.