Description
Price for 11.35L
Sikafloor-219 UTE is a multi-functional, two component, high solids, low VOC, low odour, water clear epoxy resin that can be applied with or without pre-packaged colour paks or metallic pigments to create a variety of durable, decorative coating finishes.
- Excellent protection for new or old concrete and properly prepared steel surfaces
- Good mechanical resistance
- Glossy aesthetic finish
Material Use:
Sikafloor®-219 UTE is a universal, multifunctional, two-component epoxy floor coating designed for durable, decorative coatings. It can be applied water-clear or pigmented using pre-packaged colour paks or metallic pigments. It is typically used as a primer, broadcast surfacing, trowel mortar binder, or high-build coating on concrete or steel surfaces.
System Components:
- Component A: Resin (7.57 L)
- Component B: Hardener (3.78 L)
- Optional Additive: Sikafloor® UTE Colour Pak (500 ml per 3.78 L of resin for pigmentation)
Applications:
- Ideal for new or old concrete and properly prepared steel surfaces.
- Suitable for environments requiring good mechanical resistance, seamless aesthetics, and ease of maintenance.
- Certified for use in food plants (CFIA and USDA compliant).
Application Details:
- Mix Ratio: 2:1 by volume (A:B); with Colour Pak, add 500 ml per gallon of Part A.
- Primer Coat Coverage: 203 ft²/US gal @ 8 mils
- Wear Coat Coverage: 106 ft²/US gal @ 15 mils
- Total Thickness: 23 mils for smooth coating
- Pot Life: ~26 minutes at 23°C (73°F)
- Curing Time (23°C):
- Foot traffic: ~24 hours
- Light traffic: ~2 days
- Normal traffic: ~5 days
- Full Cure: Mechanical and chemical properties achieved after full cure.
- Overcoating Times (23°C): 24–48 hours; if exceeded, surface must be abraded to a dull finish before recoating.
Special Notes:
- Environmental Limits:
- Application temperature: 10–30°C (50–85°F)
- Substrate moisture must be ≤ 4% by mass (Tramex meter).
- Relative humidity max: 85%
- Substrate must be 3°C above Dew Point.
- Priming & Moisture Mitigation:
- Use Sikafloor®-1610 or Sikafloor®-81 EpoCem®CA if substrate moisture >4% or RH >85%.
- UV Stability:
- Will discolor over time with UV exposure. Not UV stable.
- Limitations:
- Not recommended for exterior slabs with freeze/thaw exposure.
- Not suitable for negative side waterproofing.
- Avoid use on substrates with potential ASR (alkali-silica reaction).
- Mixing Instructions:
- Mechanically mix only. Avoid air entrapment.
- Scrape container sides and bottom during mixing.
- Do not exceed recommended pigment dosage to maintain curing and resistance properties.
Sikafloor®-219 UTE is best used as part of a floor coating system with proper priming (Sikafloor®-1610 or Sikafloor®-81 EpoCem®CA as needed), optional color pigmentation, and wear coats. It offers robust performance in demanding interior applications where hygiene, durability, and aesthetics are critical.
https://can.sika.com/en/construction/floors-walls/flooring-products/smooth-floor-coating/sikafloor-219-ute.html
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.