TrafficGuard MB

Two Component Reflective Traffic Marker Bonding Agent

 TrafficGuard MB is a hybrid urethane bonding agent designed primarily for the installation of reflective pavement markers (Type II and IV per AASHTO M-237). It is also suitable for general patching, repair, anchoring, and bonding tasks on asphalt and concrete roadways.

 This is a two-component system with a 1:1 mix ratio:

·      Part A: Amber/Activator

·      Part B: Black/Resin

·      When mixed, the resulting product is a dark gray urethane compound.

·      Installation of Type II and IV reflective traffic markers

·      Small patch repairs and bonding applications

·      Anchoring applications requiring quick bond strength and durability under traffic conditions

·      Mix Ratio: 1:1 (by volume)

·      Gel Time: 7 minutes

·      Initial Bond Strength (to concrete at 60 minutes): 267 psi

·      Final Bond Strength (to concrete at 210 minutes): 841 psi (100% concrete failure)

·      Slant Shear Strength (dry): 5164 psi (100% concrete failure)

·      Slant Shear Strength (water soaked): 2055 psi

·      Application Temperature Range: 28°F (-2°C) to 120°F (49°C)

·      Optimal Equipment Use: Plural component equipment recommended at temperatures below 40°F (4°C), with heating to 80°F (27°C)

·      VOC Content: 0 (safe for contractors and the environment)

·      Solids Content: 100% (no added fillers)

·      Pot Life: ~7 minutes after mixing

·      Cure Characteristics: Quick setting with strong early and final bond strength

·      UV Resistance: Not specified; recommended for applications where UV exposure is minimal

·      Storage Conditions: Store at 50°F - 80°F (10°C - 27°C); shelf life is 12 months in unopened containers

·      Installation Season Flexibility: Can be applied in a wide temperature range, suitable for all seasons

·      Coverage: Not explicitly listed; depends on application method and marker size