Description
With the performance and coating characteristics of a traditional oil-based enamel, Pro Industrial™ Waterbased Alkyd Urethane Enamel brings together the convenience and ease of use of a waterborne coating. It provides beauty and durability when applied to interior/exterior surfaces such as properly prepared drywall, wood, masonry, and metal.
Material Use:
Pro Industrial Waterbased Alkyd Urethane Enamel is a premium-quality, low-sheen interior and exterior enamel designed for high-performance applications. It combines the ease of waterborne application with the durability and performance of traditional oil-based enamels. This product is ideal for use on properly prepared drywall, wood, masonry, concrete, and metal surfaces, offering excellent washability, flow, leveling, and resistance to yellowing. It is suitable for use in USDA-inspected facilities.
System Components:
This coating system typically includes a primer appropriate to the substrate, followed by two coats of Pro Industrial Waterbased Alkyd Urethane Enamel. The system components vary depending on the substrate:
- Steel, Aluminum, Galvanized Metal:
- Primer: Pro Industrial Pro-Cryl Primer
- Topcoat: 2 coats of Pro Industrial Waterbased Alkyd Urethane
- Concrete Block (CMU):
- Primer: Pro Industrial Heavy Duty Block Filler or Loxon Acrylic Block Surfacer
- Topcoat: 2 coats of Pro Industrial Waterbased Alkyd Urethane
- Concrete and Masonry:
- Primer: Loxon Concrete & Masonry Primer or Loxon Conditioner
- Topcoat: 2 coats of Pro Industrial Waterbased Alkyd Urethane
- Drywall:
- Primer: ProMar 200 Zero V.O.C. Primer
- Topcoat: 2 coats of Pro Industrial Waterbased Alkyd Urethane
- Wood (Exterior):
- Primer: Exterior Wood Primer
- Topcoat: 2 coats of Pro Industrial Waterbased Alkyd Urethane
- Wood (Interior):
- Primer: Premium Wall & Wood Primer
- Topcoat: 2 coats of Pro Industrial Waterbased Alkyd Urethane
Applications:
This product is suitable for commercial, institutional, and industrial environments where a durable, washable, and aesthetically pleasing finish is required. It is commonly used on doors, trim, walls, and structural steel in both interior and exterior settings.
Application Details:
- Application Methods: Brush, roller, or airless spray
- Recommended Wet Film Thickness (WFT): 4.0–5.0 mils
- Recommended Dry Film Thickness (DFT): 1.2–1.6 mils
- Coverage Rate: 310–414 sq. ft. per gallon per coat (theoretical coverage at 1 mil DFT is 497 sq. ft./gal)
- Pot Life: Not applicable (single-component water-based product)
- Dry Time @ 77°F / 50% RH:
- To Touch: 1–2 hours
- To Recoat: 4 hours
- Full Cure Time: Not explicitly stated; allow at least one week for adhesion testing
- Temperature Range for Application: 50°F (10°C) to 100°F (37.8°C), with surface at least 5°F above dew point
- Maximum Relative Humidity: 85%
- Reducer/Cleanup: Water
- Spray Equipment Settings:
- Pressure: 2000 psi
- Tip Size: 0.013–0.017 inch
- Filter: 60 mesh
- Brush/Roller Recommendations:
- Brush: Nylon-polyester (e.g., Purdy® Syntox®)
- Roller: 1/4"–1/2" woven cover (e.g., Purdy® White Dove™)
Special Notes:
- This product is not UV-stable and is best used in areas where UV exposure is limited or where color retention is not critical.
- VOC content is less than 50 g/L, making it compliant with most environmental regulations including OTC, CARB, and SCAQMD.
- Not LEED v4 Emissions certified, but LEED v4 VOC compliant.
- Excellent resistance to yellowing, block resistance, and dry heat resistance up to 200°F.
- Surface preparation is critical for performance. All surfaces must be clean, dry, and free of contaminants. Glossy surfaces should be dulled, and previously painted surfaces should be tested for adhesion.
- Do not apply immediately after rain or during foggy weather.
- For mildew-prone areas, clean thoroughly with a mildew remover before application.
- Shelf life is 36 months unopened.
- Certified under MPI #167 and #168.
- Not recommended for immersion service or continuous water exposure.
- Dispose of rags and waste materials properly to prevent spontaneous combustion.
This product is a versatile and durable option for a wide range of architectural and light industrial applications, especially where low VOC and water cleanup are desired.
https://www.sherwin-williams.com/painting-contractors/products/pro-industrial-waterbased-alkyd-urethane
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.